maint

Equipment Yard & Maintenance

Heavy equipment is expensive when it’s working—and ruinous when it isn’t. RangerSight.AI visually inspects your fleet every hour, fusing camera intelligence with bolt-on telemetry sensors to predict failures, enforce maintenance schedules, and eliminate the “I didn’t know it was leaking” excuse.

Integrated Hardware

Purpose-Built Sensor Devices

🛢

RS-OilWick™ Leak Sensor

A fluoropolymer-coated strip that changes capacitance on contact with petroleum fluids. Mount it under hydraulic fittings, engine pans, or final-drive seals. It distinguishes fresh leaks from rainwater and reports leak rate in mL/hr via LoRa to the nearest camera hub.

⏱️

RS-HourPulse™ Runtime Logger

Clamp-on AC/DC current transformer that logs engine runtime to the second. No ECM integration needed—it measures alternator ripple current to determine run state, idle vs. loaded duty cycle, and cumulative service hours. Auto-triggers maintenance alerts at programmable intervals.

DataGrease™ Automated Fleet Lubrication

Fully automated grease delivery for every zerk fitting on your fleet. DataGrease maps all lubrication points—from kingpins and U-joints to slew-ring races and boom-foot bushings—across commercial and military equipment. Its GPS-guided lube truck dispatches on mileage, hour-meter, or condition triggers, servicing up to 186 grease points per machine with MIL-PRF-10924 compliant lithium-complex grease. Every shot is logged with timestamp, PSI, and volume so you have a DOD-auditable lubrication chain-of-custody. Visit datagrease.com to schedule your fleet.

Why Measure This?

The Value of Every Data Point

Hydraulic Leak Volume

Catching a 2 mL/hr leak at day one prevents the 15-gallon puddle (and $4,200 fluid replacement + EPA fine) you’d find at the end of the month. RS-OilWick pays for itself on the first catch.

True Engine Hours vs. Idle Hours

Most hour meters can’t distinguish idle from productive load. RS-HourPulse can—so you schedule oil changes based on actual thermal stress, not just clock time, extending drain intervals by up to 40%.

Grease-Point Coverage Rate

The average CAT 330 excavator has 186 grease zerks. Miss even one pivot-pin fitting and you’re looking at a $12,000 bushing replacement in 600 hours. DataGrease guarantees 100% coverage on every service visit with photo-verified proof per fitting.

Lubrication Compliance (MIL-SPEC)

Military and government fleets require MIL-PRF-10924 / MIL-PRF-81322 grease specs with full chain-of-custody documentation. DataGrease auto-generates DA Form 2408-compliant service records, eliminating the #1 audit failure point for TACOM-managed motor pools.

See It In Action

Request a live demo tailored to your maint deployment.

Access Dashboard →